《自制》耗材烘干箱，潮湿耗材的拯救之路
MẸO! Click chuột phải và chọn "Save link as..." để tải xuống.
| VIDEOS | |||
| MP4 | N/A | 480P | Tải xuống |
| MP4 | N/A | 360P | Tải xuống |
| AUDIO | |||
| MP4 | N/A | mp4a.40.2 | Tải xuống |
| MP4 | N/A | mp4a.40.2 | Tải xuống |
| MP4 | N/A | mp4a.40.2 | Tải xuống |
| THUMBNAILS | |||
|
JPEG | Origin Image | Tải xuống |
G代码
M73 P0 R1
M73 Q0 S1
M201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2
M203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E4.50 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107
M862.3 P "MK3S" ; printer model check
M862.1 P0.4 ; nozzle diameter check
M115 U3.10.0 ; tell printer latest fw version
G90 ; use absolute coordinates
M83 ; extruder relative mode
M104 S27 ; set extruder temp
M140 S70 ; set bed temp
M190 S70 ; wait for bed temp
M109 S27 ; wait for extruder temp
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M900 K0.05 ; Filament gcode LA 1.5
M900 K30 ; Filament gcode LA 1.0
M73 P6 R1
M73 Q6 S1
M73 P10 R1
M73 Q10 S1
M107
M221 S100 ; reset flow
M900 K0 ; reset LA
M907 E538 ; reset extruder motor current
M104 S0 ; turn off temperature
M140 S70 ; turn off heatbed
M107 ; turn off fan
M84 ; disable motors
M73 P100 R0
M73 Q100 S0
G代码详解链接
https://duet3d.dozuki.com/Wiki/Gcode
M73 P0 R1
M73 Q0 S1
M201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2
M203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E4.50 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107
M862.3 P "MK3S" ; printer model check
M862.1 P0.4 ; nozzle diameter check
M115 U3.10.0 ; tell printer latest fw version
G90 ; use absolute coordinates
M83 ; extruder relative mode
M104 S27 ; set extruder temp
M140 S70 ; set bed temp
M190 S70 ; wait for bed temp
M109 S27 ; wait for extruder temp
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M900 K0.05 ; Filament gcode LA 1.5
M900 K30 ; Filament gcode LA 1.0
M73 P6 R1
M73 Q6 S1
M73 P10 R1
M73 Q10 S1
M107
M221 S100 ; reset flow
M900 K0 ; reset LA
M907 E538 ; reset extruder motor current
M104 S0 ; turn off temperature
M140 S70 ; turn off heatbed
M107 ; turn off fan
M84 ; disable motors
M73 P100 R0
M73 Q100 S0
G代码详解链接
https://duet3d.dozuki.com/Wiki/Gcode
Trang được hỗ trợ
